| Switch Specifications | |
|---|---|
| Mechanical | |
| Dimensions | 135 x 185 x 32 mm (5.3 x 7.3 x 1.3") |
| Enclosure Material | Polycarbonate |
| Hardware | |
| Management Interface | Ethernet In-Band |
| Networking Interface | (1) GbE PoE+ RJ45 port (4) 10 GbE RJ45 ports |
| Total Non-Blocking Throughput | 41 Gbps |
| Switching Capacity | 82 Gbps |
| Forwarding Rate | 61.012 Mpps |
| Power Method | (1) PoE+, 50—57V DC, 25W (1) USB Type-C, 5V DC, 5A |
| Power Supply | PoE+ (Pins 1,2+/3,6- or 4,5+/7,8-) AC/DC power adapter, 5V DC, 5A, 1.5 m cord (Included) |
| Supported Voltage Range | 90—264V AC (Adapter) |
| Max Power Consumption | 25W |
| ESD/EMP Protection | Air: +16kV, Contact: +12kV |
| Button | Factory Reset |
| Ambient Operating Temperature | -5 to 45C (23 to 113F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC |
| Switching Features | |
| Layer 2 Features |
IGMP Snooping STP / RSTP with priorities and port-level disable Port Isolation Storm Control Voice VLAN Port Mirroring LACP Port Aggregation Multicast / Broadcast Rate Limiting MAC Address Blocking Flow Control 802.1X Control Jumbo Frames Proprietary Loop Protection DHCP Snooping / Guarding Egress Rate Limit LLDP-MED Port Restricted by MAC Device Isolation with ACLs |
| LEDs | |
| System | Status |
| Ethernet | Speed / Link / Activity |
| Software | |
| Application Requirements | UniFi Network Version 6.1.67 and later |